- #1
amorphos_b
- 34
- 3
My idea for a flying car...The image below shows my idea for what i call a flyer [flying car/vehicle]. The basic principle is to utilise lift instead of thrust momentum as the means of take-off and flight. This means it won't blow air everywhere and doesn't have dangerous blades [also has safety micro-gauze around wing-mesh], thus providing an improvement to helicopters and a greater diversity of landing potential. The essential idea is simple, if e.g. You tied a small rc plane to a pole by wire, it could take off and land as usual but in circular fashion, so if you had hundreds of them they would do the same. Now add a spoke to connect them to the pole and they would lift en masse as a complete unit. Each disk of wings added together [4X4] would give similar amount of lift to a small light aircraft, where essentially we are rearranging the functionality of such a craft into this form.The vehicle would be mostly composed of artificial black diamond [using my carbon manifestor invention idea [like a 3D printer but not that]] and so is extremely light in weight, and 5 times stronger than the finest steel. The method this version uses is what i call a ‘wing-mesh’ which is a collection of small wings in multiple disks, connected by carbon wires in rings such to provide tilting action akin to take off position for aircraft. A small [non-drive] propeller can be added in front of the oncoming rotation segment of the wing-mesh, so as to create greater air density. A set of multiple small main drive propellers are stationed at the rear of the vehicle and are switched on once the vehicle is say 30ft in the air. they are small so as to provide a smaller thrust vector. The ultra-high-speed motors will have carbonado [black diamond] wires for lightness [instead of copper] and greater rotary speed, this due to the material having 5 times greater conductivity than copper.Ideally as the inventor i would make it very reliable with 3D vision provided by cameras [and emergency parachutes] at the four corners, along with all available detection technology.
_