What are some advanced resources for applied electromagnetics in engineering?

In summary, the conversation is about the person's search for more advanced books in the field of applied engineering electromagnetics. They are interested in topics such as materials, radiation/antennas, and RF/Microwave design. A suggestion is given to check out books on engineering electromagnetics, specifically mentioning the books by Ramo, Whinnery and Van Duzer, Cheng, Pozar, and Collin. The person also mentions that they have access to the Balanis antenna book through their university library.
  • #1
thegreenlaser
525
16
As the title says, I've worked through all of Griffiths in my EM classes. It's a great book, but I plan to continue in the field of applied EM so I now need something more advanced. I'm more interested in the engineering/applied side of things, so I'm interested in stuff like materials, radiation/antennas, and RF/Microwave design. Any suggestions?
 
Physics news on Phys.org
  • #2
If you're into the applied side, I''d check out books on engineering electromagnetics. Just search for them on amazon and see what comes up.
 
  • #3
Here is a free book that looks reasonable:
http://www.ece.rutgers.edu/~orfanidi/ewa/

Beyond that, hopefully you have access to a university library, as the styles of various engineering electromagnetics books can vary greatly. For very good discussions of transmission lines, guided waves, and antennas I like the old-school Ramo, Whinnery and Van Duzer:
https://www.amazon.com/dp/0471871303/?tag=pfamazon01-20
second edition is very good and cheap. Also has a reasonable intro to microwave network formalism. The chapters on statics are AWFUL, but you have Griffiths so you are good. A book that has less content (no microwave networks, etc.) but is a little easier to work through (shows all the mathematical steps) is Cheng's book:
https://www.amazon.com/dp/0201128195/?tag=pfamazon01-20

There are of course other general engineering electromagnetics books as well, but I am less familiar with them. Used copies of old editions are usually no worse (and sometimes better) than the new editions. After learning the basics from these types of books, then more specialized books may be of interest:

For pure microwave engineering, I like Pozar
https://www.amazon.com/dp/0471170968/?tag=pfamazon01-20

Foro antennas I like Collin
https://www.amazon.com/dp/0070118086/?tag=pfamazon01-20
as most everything is derived from first principles. The book by Balanis is a standard that many folks like:
https://www.amazon.com/dp/0060404582/?tag=pfamazon01-20

enjoy,

jason
 
Last edited by a moderator:
  • #4
Just to add a couple of points to my previous post

1. on further reflection, Cheng is better suited for self study of the basics of transmission lines, waveguides, and basic antennas. Ramo is what I usually turn to in order to look something up, though, and covers most/all of undergrad engineering electromagnetics

2. The book by Pozar could be read by you right now - it does not cover antennas, though. Even the first edition is terrific, so look for cheap used copies of old editions.
EDIT: here is a link to the first edition.
https://www.amazon.com/dp/0201504189/?tag=pfamazon01-20jason
 
Last edited by a moderator:
  • #5
@Sentin: thanks, I forgot to mention that I'm in EE, so engineering electromagnetics was kind of my starting point in searches.

@jason: thanks for all the info. I'm definitely going to check out the Balanis antenna book because I have free online access to it through my school's library, which is a big plus. I looked at Pozar for RF/Microwave, but unfortunately all of the library's copies are reserved for the summer, so I'll have to wait for that one. I'm going to keep looking around and see if I can find some of the other books you mentioned. Thanks again!
 

Related to What are some advanced resources for applied electromagnetics in engineering?

What is "Done Griffiths EM"?

"Done Griffiths EM" refers to the textbook "Introduction to Electrodynamics" written by David J. Griffiths, commonly used in undergraduate courses in electromagnetism.

Is "Done Griffiths EM" a good textbook for learning electromagnetism?

Many students and professors consider "Done Griffiths EM" to be an excellent textbook for learning electromagnetism. It is well-written, comprehensive, and includes many helpful examples and practice problems.

What are some topics covered in "Done Griffiths EM"?

"Done Griffiths EM" covers topics such as electrostatics, magnetostatics, electromagnetic waves, and Maxwell's equations. It also includes chapters on special relativity and vector calculus, which are important for understanding electromagnetism.

What are some resources for further study after completing "Done Griffiths EM"?

Some recommended resources for further study after completing "Done Griffiths EM" include advanced textbooks on electromagnetism, such as "Classical Electrodynamics" by John David Jackson or "Electromagnetic Theory" by Julius Adams Stratton. Online resources, such as lecture notes and videos, can also be helpful for further understanding of the concepts covered in "Done Griffiths EM".

Is "Done Griffiths EM" suitable for self-study?

"Done Griffiths EM" can be used for self-study, but it may be more challenging without the guidance of a professor or tutor. It is recommended to have a strong foundation in calculus and physics before attempting to study electromagnetism on your own using this textbook.

Similar threads

Replies
15
Views
3K
  • Science and Math Textbooks
Replies
4
Views
1K
  • Science and Math Textbooks
Replies
5
Views
882
  • Science and Math Textbooks
Replies
10
Views
5K
Replies
1
Views
704
  • Science and Math Textbooks
Replies
1
Views
1K
  • STEM Academic Advising
Replies
14
Views
838
Replies
3
Views
790
  • Poll
  • Science and Math Textbooks
Replies
2
Views
6K
Back
Top