- #1
williebelong
- 1
- 0
how would I select a spring for a range of movement of 300mm and a maximum force of 100N?
williebelong said:how would I select a spring for a range of movement of 300mm and a maximum force of 100N?
The 300mm movement in the spring selection allows for a longer range of motion, which can be beneficial for applications that require a larger displacement.
The 100N force is determined based on the stiffness of the spring, which is typically measured in Newtons per millimeter (N/mm). The force is calculated by multiplying the stiffness by the displacement, in this case 300mm.
Yes, the movement and force can be adjusted by selecting a different spring with a different stiffness. This will change the force-displacement relationship and allow for different ranges of movement and force.
When selecting a spring with 300mm movement and 100N force, factors such as the required force for the application, the available space for the spring, and the desired range of motion should be taken into consideration.
There are no specific limitations to using a spring with 300mm movement and 100N force, as it depends on the specific application and requirements. However, it is important to ensure that the spring is properly installed and within its recommended load and displacement limits for optimal performance and safety.