Rectifier circuit for AC sources with 180˚ phase offset

In summary, you can rectify AC outputs with a 180° phase shift by connecting the wires in a full-wave bridge.
  • #1
Manuel12
7
1
In a simple 2-phase generator that I am making, I have 2 pairs of oppositely placed copper coils in arrangement similar to this:

Screenshot 2023-01-05 at 11.25.52.png


I would like the generator to power DC devices. My question is: How could one rectify the output from opposing coils? Or, in other words, how could you rectify 2 AC outputs with an 180˚ phase shift?
 
Engineering news on Phys.org
  • #2
I would expect the windings at 90° would have phase at 90°.
You need to show the rotor magnetic poles.

Opposite coils would have phase at 180°, so would be connected to sum the voltages.
For 180°, reverse the connections, or wind the coil backwards.
Use two full-wave bridge rectifiers, connect the DC outputs in parallel.
 
  • #3
Baluncore said:
I would expect the windings at 90° would have phase at 90°.
You need to show the rotor magnetic poles.

Opposite coils would have phase at 180°, so would be connected to sum the voltages.
For 180°, reverse the connections, or wind the coil backwards.
Use two full-wave bridge rectifiers, connect the DC outputs in parallel.
By winding the coil backwards, do you mean winding opposing ones in opposite directions to each other? Just want to check.
 
  • #4
Manuel12 said:
By winding the coil backwards, do you mean winding opposing ones in opposite directions to each other? Just want to check.
You are now aware that voltages can add or subtract, depending on how you wind or connect the coils.

How many North poles are there on the rotor?
How many South poles are there on the rotor?
 
  • Like
Likes Manuel12
  • #5
Baluncore said:
You are now aware that voltages can add or subtract, depending on how you wind or connect the coils.

How many North poles are there on the rotor?
How many South poles are there on the rotor?
One north pole on one half of the cylinder, one south pole on the other
 
  • #6
Manuel12 said:
One north pole on one half of the cylinder, one south pole on the other
The output of the windings will be in quadrature, which means 90°.

You are building a two phase alternator with four wires going to the rectifiers.
TwoPoleTwoPhase.png
 
  • Like
Likes Manuel12

Similar threads

  • Electrical Engineering
Replies
10
Views
2K
  • Electrical Engineering
Replies
7
Views
899
  • Electrical Engineering
Replies
8
Views
753
Replies
3
Views
615
  • Electrical Engineering
Replies
8
Views
2K
Replies
6
Views
2K
  • Electrical Engineering
Replies
7
Views
3K
  • Electrical Engineering
Replies
12
Views
4K
  • Electrical Engineering
Replies
10
Views
943
  • Electrical Engineering
Replies
25
Views
3K
Back
Top