Optical Bandpass filter specification

In summary, the 0.1nm bandpass filter refers to a filter that allows a bandwidth of 0.1nm in the optical spectrum. This is equivalent to a frequency range of approximately 12.5GHz. A datasheet for a typical optical bandpass filter can provide more specific information on the filter's center frequency.
  • #1
OrangeYogi
5
0
Hello,

For optical bandpass filter specification, what do they mean by 0.1nm bandpass filter? What is the equivalent bandpass frequency range of the filter?

Thank you.
 
Engineering news on Phys.org
  • #2
OrangeYogi said:
Hello,

For optical bandpass filter specification, what do they mean by 0.1nm bandpass filter? What is the equivalent bandpass frequency range of the filter?

Thank you.
Can you post a link to a typical datasheet for an optical bandpass filter? :smile:
 
  • #3
Start with the relation between wavelength and frequency:
$$\lambda f=c$$ differentiating gives $$\Delta f=-\frac{c}{\lambda _{0}^{2}}\Delta \lambda $$ The negative sign means that an increase in frequency corresponds to a decrease in wavelength. Assume a wavelength for your carrier frequency, a common one for optical communication purposes is 1550 nm. So the equivalent frequency bandwidth is
$$\frac{\left( 3\cdot {{10}^{8}}\ [GHz\cdot nm] \right)}{{{\left( 1550\ [nm] \right)}^{2}}}\left( 0.1\ [nm] \right)\cong 12.5\ [GHz]$$

Obviously the filter manufacturer will have to specify the filter center frequency for your application.
 
  • Like
Likes OrangeYogi

Related to Optical Bandpass filter specification

1. What is an optical bandpass filter?

An optical bandpass filter is a type of filter used in optics to allow only a specific range of wavelengths of light to pass through while blocking all other wavelengths. This allows for the isolation of a specific color or range of colors, making it useful for many applications in optics and spectroscopy.

2. How is the bandpass of an optical filter specified?

The bandpass of an optical filter is typically specified by the full width at half maximum (FWHM) of the transmission curve. This indicates the range of wavelengths that will be allowed to pass through the filter with at least 50% transmission. The narrower the FWHM, the more specific the filter is in isolating a particular wavelength or range of wavelengths.

3. What are some common applications of optical bandpass filters?

Optical bandpass filters have a wide range of applications, including in spectroscopy, fluorescence microscopy, colorimetry, and laser systems. They are also commonly used in cameras and other imaging devices to selectively capture specific colors or wavelengths of light.

4. How are optical bandpass filters manufactured?

Optical bandpass filters can be manufactured using various methods, including thin-film deposition, interference coatings, and etching techniques. These methods allow for precise control over the transmission and blocking of specific wavelengths, resulting in highly efficient and accurate filters.

5. What factors should be considered when selecting an optical bandpass filter?

When selecting an optical bandpass filter, it is important to consider the desired bandpass, the spectral range of the filter, the peak transmission and blocking levels, and the angle of incidence. Other factors such as size, substrate material, and environmental conditions may also need to be taken into account for specific applications.

Similar threads

  • Electrical Engineering
Replies
6
Views
2K
  • Electrical Engineering
Replies
29
Views
3K
Replies
0
Views
113
Replies
20
Views
2K
  • Electrical Engineering
Replies
2
Views
1K
  • Electrical Engineering
Replies
1
Views
3K
  • Electrical Engineering
Replies
10
Views
2K
  • Electrical Engineering
Replies
4
Views
460
  • Electrical Engineering
Replies
6
Views
1K
  • Electrical Engineering
Replies
7
Views
3K
Back
Top