- #1
Electronic
- 3
- 0
Good Day,
I have defective Aluminium windings motor.
As you know Aluminium is very difficult to winding.
So, I want to use Copper wire to re-winding the motor.
How can I do that?
What size should I use and what will be the number of turns?
Someone told me that you can use Copper by reducing 15% from the sectional area of Aluminium wire.
Another one gave me this table:
[PLAIN]http://img401.imageshack.us/img401/2595/tablebf.jpg
Copper Diamet mm Aluminium Diameter mm
0.3 0.3795
0.35 0.44275
0.4 0.506
0.45 0.56925
0.5 0.6325
0.55 0.69575
0.6 0.759
0.65 0.82225
0.7 0.8855
0.75 0.94875
0.8 1.012
0.85 1.07525
0.9 1.1385
0.95 1.20175
1 1.265
1.05 1.32825
1.1 1.3915
1.15 1.45475
1.2 1.518
1.25 1.58125
1.3 1.6445
I need your advice, please.
I have defective Aluminium windings motor.
As you know Aluminium is very difficult to winding.
So, I want to use Copper wire to re-winding the motor.
How can I do that?
What size should I use and what will be the number of turns?
Someone told me that you can use Copper by reducing 15% from the sectional area of Aluminium wire.
Another one gave me this table:
[PLAIN]http://img401.imageshack.us/img401/2595/tablebf.jpg
Copper Diamet mm Aluminium Diameter mm
0.3 0.3795
0.35 0.44275
0.4 0.506
0.45 0.56925
0.5 0.6325
0.55 0.69575
0.6 0.759
0.65 0.82225
0.7 0.8855
0.75 0.94875
0.8 1.012
0.85 1.07525
0.9 1.1385
0.95 1.20175
1 1.265
1.05 1.32825
1.1 1.3915
1.15 1.45475
1.2 1.518
1.25 1.58125
1.3 1.6445
I need your advice, please.
Last edited by a moderator: