- #1
Simonglo
- 2
- 0
Thread moved to the schoolwork forums and OP has been reminded to always show their work on schoolwork problems.
TL;DR Summary: I've been asked to design a power generating system. I could really use some help on how to approach this question, as I cant really find something like that in my study meterial.
So I've been asked to design a system that would produce the biggest amount of power possible, using these parameters:
A Hot air stream, with a temperature of 700C, preasure of 8 Bar and a flow rate of 10 KG/min.
A stream of hot steam, with a temperature of 350C, preasure of 1 BAR, and a flow rate of 10KG/min.
A lake with a static temperature of 16C, and the air around the system which is at 22C and 1 Bar.
Any suggestions on how to approach this?
So I've been asked to design a system that would produce the biggest amount of power possible, using these parameters:
A Hot air stream, with a temperature of 700C, preasure of 8 Bar and a flow rate of 10 KG/min.
A stream of hot steam, with a temperature of 350C, preasure of 1 BAR, and a flow rate of 10KG/min.
A lake with a static temperature of 16C, and the air around the system which is at 22C and 1 Bar.
Any suggestions on how to approach this?